Yamaha V5.1 CL/QL Series V5.1 Supplementary Manual [English] - Page 3

I/O devices and external head amps Now supports various Dante devices such as digital wireless receivers, processors, and more from third-party partners, plus NEXO and Yamaha. • Sony DWR-R03D DWX Digital Wireless Receiver • Stagetec NEXUS(XDIP) Multichannel I/O Board • NEXO NXAMPmk2 Powered TD Controller • Yamaha DZR-D series Powered Loudspeakers DXS XLF-D series Powered Subwoofers MRX/MTX series Signal Processors Added supported devices The devices can be mounted on the DEVICE MOUNT page in the DANTE SETUP window. I/O devices and external head amps Remotely controlling an external head amp Now supports the HA remote controllable devices. • Stagetec NEXUS(XDIP) Multichannel I/O Board • Yamaha MRX/MTX series Signal Processors I/O DEVICE screen (I/O page) 4 1 2 5 3 The indicator ( ) appears in the remote control supported device. The NXAMPmk2 supports remote control with the Dante card (NXDT104mk2). 6 1 +48V indicator Indicates the phantom power (+48V) on/off status for each port. 2 GAIN knob Indicates the gain of the head amp on the I/O device. This screen is only for display; the value cannot be edited. 3 HPF indicator Indicates the high-pass filter on or off status for each port. 4 Control status indicator Indicates the control status of the device. 5 SYSTEM/SYNC indicators Displays the error, warning, and information messages of the Dante device. 6 OUTPUT PATCH button Appears when selecting a device (for I/O DEVICE) having a large number of channels. Touch to open the OUTPUT PATCH window. 3 V5.1 Supplementary Manual