Yamaha V5.1 CL/QL Series V5.1 Supplementary Manual [English] - Page 8

I/O DEVICE EDIT screen This screen is displayed when you select the desired I/O device in the I/O DEVICE screen (AMP page). You can remotely control the amplifier or the speakers.  For NEXO NXAMPmk2 253 4 1 6 7 8 :9 A C B 1 STATUS indicator Indicates the status of the device. OVERALL ALERT AMP PS FAN Status Overall status of the device Alert Operating status of each amplifier channel Operating status of power supply unit Operating status of each FAN unit Indicator display Green: Normal operation Yellow: Fault detection Orange: Temporary malfunction Red: Malfunction that cannot be resolved * ALERT indicator display is green and red only. When an alert occurs, the indicator turns red and the alert contents are displayed at the bottom of the screen. 2 SCENE Displays the recalled scene number and title. I/O devices and external head amps 3 CABINET Displays the name of NEXO Setup selected in the NXAMP. 4 VERSION Displays the firmware version of the device. 5 INPUT METER Displays both the input analog input levels and digital input levels. 6 STANDBY button Switches the standby mode on or off. 7 OVERMUTE button Switches the over mute (mute all channels) on or off. 8 Output level meter Displays the output level of the channel. 9 VOLUME knob Sets the channel volume. 0 LIMIT indicator Lights while the limiter for amplifier or power supply protection is applied. A PROTECT indicator Lights while the limiter for speaker protection is applied. B MUTE button Switches the channel mute on or off. C Channel name Displays the channel name (the speaker preset name for the NXAMP). 8 V5.1 Supplementary Manual