Yamaha XDA-QS5400 XDA-QS5400 Owner s Manual - Page 16

SPECIFICATIONS Specifications The specifications of the unit are as follows. Input jacks Analog Audio • Stereo Audio (RCA) x 2 (CUT IN, AUX) Output jacks Analog Audio • Speaker Out x 4 (L/R) • Stereo Audio (RCA) x 4 (PRE OUT) • Stereo Audio (RCA) x 2 (CUT IN, AUX) Other jacks • USB x 4 (USB2.0) • Network (Wired) x 2 (Internal speed: 100Base-TX/10Base-T, External speed: 1000Base-T/100Base-TX/10Base-T) • Trigger Out x 4 • Remote In x 1 • Remote Out x 1 • Chime x 4 USB Device Capability: Mass Storage Class USB Memory Current Supply Capacity: 0.5 A Network PC Client Function AirPlay supported Internet Radio Streaming Service Audio Section Rated Output Power • (2-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω) 90/50 W • (2-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω) 100 W • (1-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω) 100/50 W • (1-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω) 200 W Dynamic Power • (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, NORMAL, 4/8 Ω) 80/40 W • (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, BRIDGE, 8 Ω) 150 W • (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL, 4/8 Ω) 100/50 W • (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE, 8 Ω) 200 W • (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL(8-ch), 4/8 Ω) 80/50 W • (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE(4-ch), 8 Ω) 170 W Maximum Effective Output Power (JEITA) • (1-channel driven, 1 kHz, 10% THD, NORMAL, 4/8 Ω) 130/65 W • (1-channel driven, 1 kHz, 10% THD, BRIDGE, 8 Ω) 260 W Total Harmonic Distortion (THD) • (20 Hz to 20 kHz, SP OUT, 25 W, 8 Ω) • (20 Hz to 20 kHz, PRE OUT, 1 V) 0.04% THD 0.005% THD Frequency Response (+0/-3 dB) • PRE OUT (NET/USB IN) • PRE OUT (AUX IN) • SP OUT (NET/USB IN) • SP OUT (AUX IN) 10 Hz to 22 kHz 10 Hz to 22 kHz 10 Hz to 22 kHz 10 Hz to 22 kHz Signal to Noise Ratio (IHF-A) • PRE OUT (NET/USB IN) • PRE OUT (AUX IN) • SP OUT (NET/USB IN) • SP OUT (AUX IN) 114 dB 108 dB 106 dB 104 dB Rated Output Level / Output Impedance • PRE OUT (L/R, 1 kHz) 2.0 V/470 Ω Maximum Output Level • PRE OUT (L/R, 0.9% THD) 4.0 V Gain • SP OUT (1 V INPUT) 25.8 dB Input Sensitivity • 1 W power (1 W/8 Ω output) • MAX power (50 W/8 Ω output) 150 mV 1.0 V Volume Control • PRE OUT/SP OUT Mute, -80 dB to 0.0 dB (0.5 dB Step) EQ Characteristics • Bass Variable width -6.0 dB to +6.0 dB (0.5 dB Step) • Bass Turnover Frequency 350 Hz • Mid Variable width -6.0 dB to +6.0 dB (0.5 dB Step) • Mid Center Frequency 1.1 kHz • Treble Variable width -6.0 dB to +6.0 dB (0.5 dB Step) • Treble Turnover Frequency 3.5 kHz Maximum Input Signal • AUX IN (1 kHz, 0.9% THD) 2.4 V General Power Supply • [U.S.A. model] • [Other models] AC 120 V, 60 Hz AC 220 to 240 V, 50/60 Hz Power Consumption • All Zone On, No Signal Condition • All Zone Off, Chime On • All Zone Off, CUT IN On, CUT IN Power On Enable 130 W 40 W 18.2 W 18.2 W Standby Power Consumption • Network Standby Off • Network Standby On (1 Zone) • Network Standby On (4 Zones) 0.2 W 3.2 W 6.0 W Dimensions (W x H x D) 437 x 46 x 443 mm (17-1/4" x 1-3/4" x 17-3/8") Weight 6.3 kg (13.9 lbs) 16 En