Yamaha YID-W10 Owners Manual - Page 7

4: Battery charge To charge your iPod/iPhone, connect it to the transmitter, and then station the transmitter with your iPod/iPhone onto the receiver. Note Do not push the transmitter detection switch hard. Transmitter detection switch 123 AB 123 AB Troubleshooting If the unit does not function properly, first of all, check the firmware of your iPod/iPhone is the latest version. If it is the latest version, refer to the table below. If the problem you are experiencing is not listed below, or if the instruction below does not help, contact the nearest authorized Yamaha dealer or service center. Transmitter LED Green: Off Problem No sound. Red: Off Green: flashes Red: Off No sound. Cause Remedy No sound is output from your iPod/iPhone. Your iPod/iPhone is not connected to the transmitter firmly. The battery of your iPod/ iPhone is empty. The dock cable is not connected to your Yamaha component. The group IDs of the transmitter and receiver are set to the different value. The power is not supplied to the receiver from your Yamaha component. Playback your iPod/iPhone, or run the YouTube or other applications. Reconnect your iPod/iPhone to the transmitter firmly. Charge your iPod/iPhone. Connect the dock cable to your Yamaha component. Match the group IDs. Change the setting of your Yamaha component referring to its owner's manual. 5 En