Yamaha YID-W10 Owners Manual - Page 9

Transmitter LED Green: lights up Red: Off Problem Cause No sound The volume of iPod/iPhone does not change when you operate the volume of your Yamaha component. Sound is output suddenly despite your iPod/ iPhone is not connected to the transmitter. Ring tone is output from your Yamaha component when your iPhone receives an incoming call. The battery is not charged. The volume is set to the minimum. Your Yamaha component is turned off. The input source of your Yamaha component is not set properly. Earphones or other device are connected to your iPod/ iPhone. Wireless communications are established between this unit's transmitter and multiple "yAired" devices simultaneously. Wireless communication is established between the receiver and another "yAired" device. Ring tone is output from your Yamaha component when your iPhone receives an incoming call. The battery charge function is not activated on your Yamaha component. The Wi-Fi communication is unstable when you are using YID-W10. The signal from YID-W10 interferes with Wi-Fi communication. Remedy Set the volume properly. Turn on your Yamaha component. Set the input source properly. Disconnect earphones or other device. Set the group IDs of the other "yAired" devices to the different value. Set the group ID of another "yAired" device to the different value. If you do not want your Yamaha component to output ring tone, set your iPhone to the silent mode. Change the setting of your Yamaha component referring to its owner's manual. Disconnect your iPod/ iPhone from the transmitter, and then reconnect firmly after a while. If this situation occurs frequently, move YID-W10 away from the Wi-Fi components. 7 En