Yamaha YST-SW45 Owner's Manual - Page 8

Connecting To Line Output Pin Jack Terminals Of The Amplifier, Using One Unit, Pre Out - 8 subwoofer

Get Yamaha YST-SW45 PDF manuals and user guides View all Yamaha YST-SW45 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER • Connect the main speakers to the speaker output terminals of the amplifier. • Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. • To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal. Using one unit Left speaker This unit OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY FROM AMPLIFIER INPUT1 LOW HIGH OFF POWER ON OFF OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY FROM AMPLIFIER INPUT1 LOW HIGH OFF Amplifier To AC outlet ‹YAMAHA DSP amplifier› SUBWOOFER ‹Amplifier› Right speaker Pin plug cords PRE OUT Using two units Left speaker OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY This unit OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY FROM AMPLIFIER INPUT1 LOW HIGH OFF FROM AMPLIFIER INPUT1 LOW HIGH OFF This unit OUTPUT TO SPEAKERS INPUT2 AUTO STANDBY FROM AMPLIFIER INPUT1 LOW HIGH OFF POWER ON OFF POWER ON OFF FROM AMPLIFIER INPUT1 LOW HIGH OFF Amplifier To AC outlet To AC outlet Right speaker Pin plug cords Notes on the above connections • When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound. • When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal. • For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 6.) 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
8
OUTPUT
INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
OUTPUT
INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
PRE OUT
SUBWOOFER
OUTPUT
INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
•
Connect the main speakers to the speaker output terminals of the amplifier.
•
Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
•
To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP
amplifier to either the left (L) or right (R) INPUT 2 terminal.
Using one unit
Using two units
Amplifier
‹YAMAHA DSP amplifier›
To AC outlet
This unit
Left speaker
‹Amplifier›
This unit
This unit
To AC outlet
To AC outlet
Amplifier
Right speaker
Left speaker
Pin plug
cords
Pin plug
cords
Notes on the above connections
•
When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on
the rear panel of the subwoofer.
If connected, they will not produce sound.
•
When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
•
For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier
has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 6.)
Right speaker