Yamaha YST-SW500 Owner's Manual - Page 7

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER • Leave the main speakers connected to the amplifier. • Line output terminals may be labeled PRE OUT, REC OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select an alternative method of connection. If using one YST-SW500 Right speaker Left speaker This unit OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE L R +R L+ FROM AMPLIFIER INPUT1 12 OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE L R +R L+ FROM AMPLIFIER INPUT1 12 Amplifier To AC outlet Pin plug cords PRE OUT If using two YST-SW500s Right speaker Left speaker OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE L R +R L+ FROM AMPLIFIER INPUT1 12 L R +R L+ FROM AMPLIFIER INPUT1 This unit OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE L R +R L+ FROM AMPLIFIER INPUT1 12 This unit OUTPUT TO SPEAKERS +R L+ INPUT2 REMOTE CODE L R +R L+ FROM AMPLIFIER INPUT1 12 Amplifier 12 Pin plug cords PRE OUT To AC outlet To AC outlet Notes • When connected to the REC OUT terminals, if the amplifier has a REC OUT selector, be sure to set it for the correct source. For information on its operation, consult the amplifier's owner's manual. • When connected to line output terminals, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound. • When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal. 7