Zanussi Z716WT83BI User Manual - Page 14
depth of cupboard door on the inner side of
View all Zanussi Z716WT83BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
y x y 16-22 mm Ø 35 mm 449 mm 12,5 - 14 mm 22±1,5 mm 595-598 mm A Cupboard door preparation For countersinking the door, it is recommended to call a professional. Align the cupboard door to the furniture correctly. Measure the distance X to fix the height of the hole to countersink the upper hinge. The centre of the hole Y should be at the same height of the stroke on the hinge support. Set the position of the lower hole respecting dimensions and distances shown in the drawing (449 mm). Countersink the holes. Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5 - 14 mm depending on the depth of cupboard door) on the inner side of the door. The hinges will be fixed to the door by means of the four supplied screws A. max. 105° To align the door perfectly, make sure that the edge of cupboard door is parallel with the appliance edge and to respect the proper opening angle (max. 105 °C). 14