Zanussi Z816WT85BI User Manual - Page 14

depth of cupboard door on the inner side of

Get Zanussi Z816WT85BI PDF manuals and user guides View all Zanussi Z816WT85BI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

y x y 16-22 mm Ø 35 mm 449 mm 12,5 - 14 mm 22±1,5 mm 595-598 mm A Cupboard door preparation For countersinking the door, it is recommended to call a professional. Align the cupboard door to the furniture correctly. Measure the distance X to fix the height of the hole to countersink the upper hinge. The centre of the hole Y should be at the same height of the stroke on the hinge support. Set the position of the lower hole respecting dimensions and distances shown in the drawing (449 mm). Countersink the holes. Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5 - 14 mm depending on the depth of cupboard door) on the inner side of the door. The hinges will be fixed to the door by means of the four supplied screws A. max. 105° To align the door perfectly, make sure that the edge of cupboard door is parallel with the appliance edge and to respect the proper opening angle (max. 105 °C). 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
x
y
y
Cupboard door preparation
For countersinking the door, it is recom-
mended to call a professional.
Align the cupboard door to the furniture correctly.
Measure the distance
X
to fix the height of the hole
to countersink the upper hinge. The centre of the
hole
Y
should be at the same height of the stroke on
the hinge support.
16-22 mm
22±1,5 mm
449
mm
595-598 mm
Ø 35 mm
12,5 - 14 mm
Set the position of the lower hole respecting dimen-
sions and distances shown in the drawing (449
mm).
Countersink the holes.
A
Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5 - 14 mm depending on the
depth of cupboard door) on the inner side of the
door.
The hinges will be fixed to the door by means of the
four supplied screws
A
.
max. 105°
To align the door perfectly, make sure
that the edge of cupboard door is par-
allel with the appliance edge and to re-
spect the proper opening angle (max.
105 °C).
14