Zanussi ZDE67560W Product Manaul - Page 10
Cleaning the drum, Caution, Clean operating screen and housing
View all Zanussi ZDE67560W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Cleaning the drum Caution! Do not use abrasives or steel wool to clean the drum. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer. What to do if ... Use a standard domestic cleaner (e.g. vinegarbased cleaner) to wipe down the inside of the drum and drum ribs. Clean operating screen and housing Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. Problem Dryer does not work. Possible cause Mains plug is not plugged in or fuse is not working correctly. Loading door is open. Have you pressed the START PAUSE button? Wrong programme selected. Fluff filter clogged. Overloading of laundry. Drying results unsatisfactory. Ventilation slots covered up. Residue on inside surface of drum or drum ribs. Conductance of water at installation site differs from standard setting of machine.1) Loading door does not close. Filter not in place2). Drying cycle ends shortly after programme starts. Not enough washing loaded or washing loaded is too dry for selected programme. Drying cycle lasts an unusually long time. Note: After around 5 hours the drying cycle ends automatically. Filter clogged. Load volume too big. Laundry insufficiently spun. 1) Only dryers with conductance programming 2) Only dryers with removable filter Remedy Plug in at mains socket. Check fuse in fuse box (domestic installation). Close loading door. Press the START PAUSE button again. Select a different programme the next time you dry (see "Programme chart" chapter). Clean fluff filter. Observe recommended loading volumes. Uncover ventilation slots. Clean inside surface of drum and drum ribs. Re-programme standard setting for degree of drying (see 'Machine settings' chapter)1). Install filter into place2). Select time programme or higher drying level (e.g. EXTRA DRY instead of CUPBOARD DRY ). Clean filter. Reduce load volume. Laundry must be adequately spun. 10 www.zanussi.com