Zanussi ZGH66424XX User Manual - Page 11

CONTROL KNOB Symbol Description no gas supply / off position Symbol Description minimum gas supply DAILY USE ignition position / maximum gas supply WARNING! Refer to Safety chapters. BURNER OVERVIEW A B C D A B C D C. Ignition candle D. Thermocouple IGNITION OF THE BURNER Always light the burner before you put on the cookware. WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse. 1. Push the control knob down and turn it counterclockwise to the maximum gas supply position ( ). 2. Keep the control knob pushed for equal or less than 10 seconds. This lets the thermocouple warm up. If not, the gas supply is interrupted. 3. Adjust the flame after it is regular. If after some tries the burner does not light, check if the crown and its cap are in correct positions. WARNING! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute. A. Burner cap B. Burner crown 11