Zanussi ZGH66424XX User Manual - Page 14
Troubleshooting
View all Zanussi ZGH66424XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TROUBLESHOOTING WARNING! Refer to Safety chapters. WHAT TO DO IF... Problem Possible cause Remedy There is no spark when you try to activate the spark generator. The flame extinguishes immediately after ignition. The flame ring is uneven. The hob is not connected to an electrical supply or it is connected incorrectly. The fuse is blown. Burner cap and crown are placed incorrectly. Thermocouple is not heated up sufficiently. Burner crown is blocked with food residues. Check if the hob is correctly connected to the electrical supply. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Place the burner cap and crown correctly. After lightning the flame, keep the knob pushed for equal or less than 10 seconds. Make sure that the injector is not blocked and the burner crown is clean. IF YOU CANNOT FIND A SOLUTION... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. 14