Zanussi ZIFN644K User Manual - Page 13

Care And Cleaning

Page 13 highlights

Heat setting Use to: Time (min) Hints Boil large quantities of water. PowerBoost is activated. HINTS AND TIPS FOR HOB²HOOD When you operate the hob with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob control panel. • Do not interrupt the signal between the hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary. Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. CARE AND CLEANING WARNING! Refer to Safety chapters. GENERAL INFORMATION • Clean the hob after each use. • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Use a special scraper for the glass. CLEANING THE HOB • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Heat setting
Use to:
Time
(min)
Hints
Boil large quantities of water. PowerBoost is activated.
HINTS AND TIPS FOR HOB²HOOD
When you operate the hob with the function:
Protect the hood panel from direct sunlight.
Do not spot halogen light on the hood panel.
Do not cover the hob control panel.
Do not interrupt the signal between the hob and
the hood (e.g. with the hand, a cookware handle
or a tall pot). See the picture.
The hood in the picture is only exemplary.
Other remotely controlled appliances
may block the signal. Do not use any
such appliances near to the hob while
Hob²Hood is on.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which work
with this function refer to our consumer website.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
GENERAL INFORMATION
Clean the hob after each use.
Always use cookware with a clean base.
Scratches or dark stains on the surface have no
effect on how the hob operates.
Use a special cleaner suitable for the surface of
the hob.
Use a special scraper for the glass.
CLEANING THE HOB
Remove immediately:
melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
dirt can cause damage to the hob. Take care to
avoid burns. Use a special hob scraper on the
glass surface at an acute angle and move the
blade on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
moist cloth and a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft cloth.
Remove shiny metallic discoloration:
use a
solution of water with vinegar and clean the
glass surface with a cloth.
13