Zanussi ZOA35471XK User Manual - Page 23
The Back Lamp, Troubleshooting, What To Do If..., Service Data
View all Zanussi ZOA35471XK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CAUTION! Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp. The back lamp 1. Turn the lamp glass cover to remove it. TROUBLESHOOTING 2. Clean the glass cover. 3. Replace the lamp with a suitable 300 °C heat- resistant lamp. 4. Install the glass cover. WARNING! Refer to Safety chapters. WHAT TO DO IF... Problem Possible cause Remedy The oven does not heat up. The oven does not heat up. The oven does not heat up. The oven does not heat up. The lamp does not operate. Steam and condensation settle on the food and in the cavity of the oven. The display shows "12.00". The oven is deactivated. The clock is not set. The necessary settings are not set. The fuse is blown. The lamp is defective. You left the dish in the oven for too long. There was a power cut. Activate the oven. Set the clock. Make sure that the settings are correct. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Replace the lamp. Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends. Reset the clock. SERVICE DATA If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. Do not remove the rating plate from the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ... 23