Zanussi ZOP37982XK User Manual - Page 23
PYROLYSIS, CAUTION, WARNING, Option, Description, CLEANING REMINDER, The cleaning reminder goes out
View all Zanussi ZOP37982XK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Install the removed accessories in the opposite sequence. PYROLYSIS CAUTION! Remove all accessories and removable shelf supports. Do not start the Pyrolysis if you did not fully close the oven door. In some models, the display shows "C3" when this error occurs. WARNING! The oven becomes very hot. There is a risk of burns. CAUTION! If there are other appliances installed in the same cabinet, do not use them when the Pyrolysis function operates. It can cause damage to the appliance. 1. Wipe out the cavity with a wet, soft cloth. 2. Clean the inner side of the door with hot water, so that the residues do not burn from the hot air. 3. Set the Pyrolysis function. Refer to "Daily use" chapter, "Oven Functions". 4. When flashes, press or to set the pyrolysis duration: 7. When the oven is cool again, the door unlocks. CLEANING REMINDER To remind you that the pyrolysis is necessary, PYR flashes in the display for 10 seconds after each activation and deactivation of the oven. The cleaning reminder goes out: • after the end of the pyrolysis. • if you press and at the same time while PYR flashes in the display. REMOVING AND INSTALLING DOOR The oven door has three glass panels. You can remove the oven door and the internal glass panels to clean them. Read the whole "Removing and installing door" instruction before you remove the glass panels. The oven door may close if you try to remove the glass panels before you remove the oven door. CAUTION! Do not use the oven without the glass panels. 1. Open the door fully and hold both hinges. Option Description P1 Light cleaning. Du- ration: 1 h. P2 Normal cleaning. Duration: 1 h 30 min. Press or turn the knob for the temperature to start the pyrolysis. You can use the END function to delay the start of the cleaning. During the pyrolysis the oven lamp is off. 5. When the oven is at the set temperature, the door locks. The display shows and the bars of the heat indicator until the door unlocks. To stop pyrolysis before it is completed, turn the knob for the oven functions to the off position. 6. When pyrolysis is completed, the display shows the time of day. The oven door stays locked. 2. Lift and turn the levers fully on both hinges. 23