Zanussi ZWF01280W User Manual - Page 11
If necessary, change the temperature and
View all Zanussi ZWF01280W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
A The default position of the flap is A (powder detergent). 2. To use liquid detergent: 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily. 3. B 2. Adjust the flap in position B. 3. Put back the drawer in the recess. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then 120 ml. • Do not set the delay start. When the flap is in position B and you want to use powder detergent: 1. Remove the drawer. 2. Adjust the flap in position A. 3. Put back the drawer in the recess. • Measure out the detergent and the fabric conditioner. • Put the detergent and the fabric conditioner into the compartments. • Carefully close the detergent drawer. ACTIVATING THE APPLIANCE Press and hold for a couple of seconds the On/Off button to activate or deactivate the appliance. A tune sounds when the appliance is activated. SETTING A PROGRAMME 1. Touch the programme button and set the programme: • The indicator of the button flashes slowly. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the indicator of the button three times. flashes red STARTING A PROGRAMME WITHOUT THE DELAY START Touch the button . • The indicator of the button stops to flash and stays on. • The programme starts, the door locks, the indicator is on. The drain pump can operate for a short time at the beginning of the washing cycle. STARTING A PROGRAMME WITH THE DELAY START The start of the programme can be delayed by 9, 6 or 3 hours. 1. Touch the button Delay Start to choose the delay you want to set. The indicator of the selected delay is on. 2. Touch the button : • The appliance starts the countdown. • When the countdown is completed, the programme starts automatically. 11