Zanussi ZWF01280W User Manual - Page 17

Technical Data

Get Zanussi ZWF01280W PDF manuals and user guides View all Zanussi ZWF01280W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Problem Possible solution There is water on the floor. You cannot open the appliance door. The appliance makes an unusual noise. The appliance fills with water and drain immediately. The cycle is shorter than the time displayed. The cycle is longer than the time displayed. The washing results are not satisfactory. You cannot set an option. • Make sure that the couplings of the water hoses are tight and there is not water leakages. • Make sure that the water inlet hose and the drain hose have no damages. • Make sure you use the correct detergent and the correct quantity of it. • Make sure that the washing programme is finished. • Set the drain or the spin option if there is water in the drum. • Do the emergency drain procedure. See "Frost precautions" (in "Care and Cleaning" chapter). • Make sure the levelling of the appliance is correct. Refer to 'Installa- tion instruction'. • Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation instruction'. • Add more laundry in the drum. The load may be too small. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. • The appliance calculates a new time according to the laundry load. See the 'Consumption Values' chapter. • An unbalanced laundry load increases the duration time. This is a normal behaviour of the appliance. • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before you wash the laundry. • Make sure that you set the correct temperature. • Decrease the laundry load. • Make sure that you press only the wanted touch button(s). After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the appliance shows other alarm codes (the indicator of button flashes in red). Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. TECHNICAL DATA SERVICE We recommend the use of original spare parts. When contacting the Authorised Service Centre, make sure that these data are available. You can find the information on the rating plate: model, PNC and Serial Number. (Mod., Prod. No., Ser. No.) Dimension Electrical connection Width/ Height/ Depth/ Total depth Voltage Overall power Fuse Frequency 600 mm/ 850 mm/ 600 mm/ 660 mm 230-240 V 2200 W 13 A 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Problem
Possible solution
There is water on the floor.
•
Make sure that the couplings of the water hoses are tight and there
is not water leakages.
•
Make sure that the water inlet hose and the drain hose have no
damages.
•
Make sure you use the correct detergent and the correct quantity of
it.
You cannot open the appli-
ance door.
•
Make sure that the washing programme is finished.
•
Set the drain or the spin option if there is water in the drum.
•
Do the emergency drain procedure. See "Frost precautions" (in
"Care and Cleaning" chapter).
The appliance makes an
unusual noise.
•
Make sure the levelling of the appliance is correct. Refer to 'Installa-
tion instruction'.
•
Make sure that the packaging and/or the transit bolts are removed.
Refer to 'Installation instruction'.
•
Add more laundry in the drum. The load may be too small.
The appliance fills with wa-
ter and drain immediately.
•
Make sure that the drain hose is in the correct position. The end of
the hose may be too low. Refer to 'Installation instruction'.
The cycle is shorter than
the time displayed.
•
The appliance calculates a new time according to the laundry load.
See the ‘Consumption Values’ chapter.
The cycle is longer than
the time displayed.
•
An unbalanced laundry load increases the duration time. This is a
normal behaviour of the appliance.
The washing results are
not satisfactory.
•
Increase the detergent quantity or use a different detergent.
•
Use special products to remove the stubborn stains before you
wash the laundry.
•
Make sure that you set the correct temperature.
•
Decrease the laundry load.
You cannot set an option.
•
Make sure that you press only the wanted touch button(s).
After the check, activate the appliance. The
programme continues from the point of interruption.
If the problem occurs again, contact the Authorised
Service Centre.
If the appliance shows other alarm codes (the
indicator of button
flashes in red). Deactivate
and activate the appliance. If the problem
continues, contact the Authorised Service Centre.
SERVICE
We recommend the use of original spare parts.
When contacting the Authorised Service Centre,
make sure that these data are available. You can
find the information on the rating plate: model, PNC
and Serial Number. (Mod., Prod. No., Ser. No.)
TECHNICAL DATA
Dimension
Width/ Height/ Depth/ To-
tal depth
600 mm/ 850 mm/ 600 mm/ 660 mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
230-240 V
2200 W
13 A
17