Zanussi ZWF144A2PW User Manual - Page 12

TEMP. When you select a washing programme, the appliance automatically proposes a default temperature. The indicator Cold = cold water. The indicator of the set temperature comes on. SPIN When you set a programme, the appliance automatically sets the maximum spin speed allowed except programme Denim. Additional spin options: • No Spin . The related indicator comes on. Set this option to deactivate all spin phases. The appliance performs only the draining phase of the selected washing programme. Set this option for very delicate fabrics. The rinse phase uses more water for some washing programmes • Rinse Hold . The related indicator comes on. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum. The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door. If you touch the Start/Pause button, the appliance performs the spinning phase and drains the water. • Night . The related indicator comes on. The intermediate and the final spinning phases are suppressed and the programme ends with water in the drum. This helps to reduce creasing. The door stays locked. The drum turns regularly to reduce creasing. You must drain the water to unlock the door. As the programme is very quiet, it is suitable for use at night time when cheaper electricity tariffs are available. In some programmes the rinses are performed with more water. If you touch the Start/Pause button, the appliance performs only the draining phase. The appliance empties the water out automatically after approximately 18 hours. PREWASH With this option you can add a prewash phase to a washing programme. The relevant indicator illuminates. • Use this option to add a pre-wash phase at 30 °C before the washing phase. This option is recommended for heavily soiled laundry, especially if containing sand, dust, mud and other solid particles. These options can increase the programme duration. PERMANENT EXTRA RINSE With this option you can add a few rinses according to the selected washing programme. Use this option for people with allergies to detergent residues and with sensitive skin. This option increases the programme duration. The corresponding indicator above the touch button illuminates and also stays permanently on during next cycles until this option is deactivated. EASY IRON The appliance carefully washes and spins the laundry to prevent the creases. The appliance decreases the spin speed, uses more water and adapts the programme duration to the type of laundry. The related indicator comes on. DELAY START With this option you can delay the start of a programme to a more convenient time. Touch the button repeatedly to set the required delay. The time increases in steps of 1 hour up to 20 hours. The display shows the indicator and the selected delay time. After touching the Start/Pause button, the appliance begins the countdown and the door is locked. FLEXITIME With this option you can reduce the programme duration depending on the load size and the degree of soiling. This adjustment should be made after the setting of Temp. and Spin . When you set a washing programme, the display shows the default duration and dashes. Touch FlexiTime button to reduce the programme duration according to your needs. The display shows the new programme duration and a number of dashes will decrease accordingly: 12