Zanussi ZWF144A2PW User Manual - Page 19

2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons. The related indicators illuminate on the display and the given information changes accordingly. If a selection is not possible an acoustic signal sounds. STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. programme dial on a wrong position). The related indicator stops flashing and stays on. The programme starts, the door is locked. The display shows the indicator . The drain pump can operate shortly before the appliance fills water. STARTING A PROGRAMME WITH THE DELAY START 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. On the display the indicator shows 2. Touch the Start/Pause button. The appliance door locks and starts the countdown of the delay start. The display shows the indicator . When the countdown is completed, the programme starts automatically. Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. On the display the indicator shows Touch the Start/Pause button. The appliance lock the door and starts the countdown of the delay start. The display shows the indicator . When the countdown is completed, the programme starts automatically. 2. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 3. Touch the Delay Start button repeatedly until the display shows and the indicator goes off. 4. Touch the Start/Pause button again to start the programme immediately. Changing the delay start after the countdown has started To change the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2. Touch the Delay Start button repeatedly until the display shows the desired delay time. 3. Touch the Start/Pause the new countdown. button again to start THE SENSICARE SYSTEM LOAD DETECTION After touching the Start/Pause button: 1. The SensiCare System starts estimating the weight of the load to calculate the real programme duration. During this phase the FlexiTime bars placed below the time digits play a simple animation. 2. After about 15-20 minutes the FlexiTime bars disappear and new cycle duration is displayed. The appliance automatically adjusts the programme duration to the load to achieve perfect washing results in the minimum possible time. INTERRUPTING A PROGRAMME AND CHANGING THE OPTIONS When the programme is running, you can change only some options: 1. Touch the Start/Pause button. The related indicator flashes. 2. Change the options. The given information in the display changes accordingly. 3. Touch the button Start/Pause again. The washing programme continues. CANCELLING A RUNNING PROGRAMME 1. Press the button ON/OFF to cancel the programme and to deactivate the appliance. 2. Press the button ON/OFF again to activate the appliance. If the AutoAdjust System has completed and the water filling has already started, the new programme starts without repeating the AutoAdjust System. The water and the detergent are not drained out in order to avoid waste. 19