Zanussi ZYNN8FW0 User Manual - Page 13

Problem, Possible cause, Solution, CLOSING THE DOOR

Get Zanussi ZYNN8FW0 PDF manuals and user guides View all Zanussi ZYNN8FW0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Problem Possible cause Solution Power indicator light flashes. Many food products are stored at the same time. The door has been opened often. The FastFreeze function is switched on. There is no cold air circulation in the appliance. An error has occurred in measuring the temperature. Store less food products at the same time. Open the door only if necessary. Refer to "FastFreeze function" section. Make sure that there is cold air circulation in the appliance. Refer to "Hints and Tips" chapter. Contact a qualified electrician or the nearest Authorized Service Centre. If the advice does not lead to the desired result, call the nearest Authorized Service Centre. CLOSING THE DOOR 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to installation instructions. 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Problem
Possible cause
Solution
Many food products are stored
at the same time.
Store less food products at the
same time.
The door has been opened of-
ten.
Open the door only if necessa-
ry.
The FastFreeze function is
switched on.
Refer to "FastFreeze function"
section.
There is no cold air circulation
in the appliance.
Make sure that there is cold air
circulation in the appliance.
Refer to "Hints and Tips" chap-
ter.
Power indicator light
flashes.
An error has occurred in meas-
uring the temperature.
Contact a
qualified
electrician
or the nearest Authorized
Service Centre.
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
CLOSING THE DOOR
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
installation instructions.
3.
If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
13