Zenith DVB412 Operating Guide - Page 14
Audio, Others
UPC - 044642701277
View all Zenith DVB412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
AUDIO Each DVD disc has a variety of audio output options. Set the player's AUDIO options according to the type of audio system you use. AUDIO Dolby Digital DTS MPEG Sample Freq. DRC Vocal Bitstream Bitstream PCM 48 kHz On On Move Select Dolby Digital / DTS / MPEG DVD Bitstream: Select "Bitstream" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio. Off (for DTS): If you select "Off", the DTS signal is not output through the DIGITAL OUT jack. Sample Freq. (Frequency) DVD If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. Dynamic Range Control (DRC) DVD With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal DVD Set to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. OTHERS The Auto Play and B.L.E. settings can be changed. OTHERS Auto Play Off B.L.E. On Move Select Auto Play DVD You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search for title that has the longest playback time and then play back the title automatically. On: Auto Play function is active. Off: Auto Play function is not active. Note: The Auto Play function may not work for some DVDs. B.L.E. (Black Level Expansion) DVD To select the black level of playback pictures. Set your preference and monitor's ability. On: Expanded grey scale. (0 IRE cut off) Off: Standard grey scale. (7.5 IRE cut off) 14