Zenith P50W38 Service Manual - Page 19
Component Off-Set adjustment - model
View all Zenith P50W38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ADJUSTMENT INSTRUCTIONS (2) DDC Data input for Digital-RGB 1) Connect PC Serial to DVI Cable of JIG for DDC Adjustment to DVI terminal (DVI Jack). 2) Operate S/W for DDC record and select DDC Data for Digital RGB in Model Menu. 3) Operate EDID Write command. 4) Operate EDID Read command and check whether Check Sum is OK. 5) If Check Sum is NG, repeat 3) ~ 4). 6) If Check Sum is OK, DDC Data for Digital-RGB input is completed. [ The RGB terminal it leads certainly and to Analog RGB DDC Data Download percentage case to the DVI terminal it connects the Cable, it does not become, the DVI terminal it leads and and the Cable Digital RGB DDC Data to Download percentage case to the RGB terminal it connects, it does not become. Namely, the Cable in two terminals it has the JIG equipment which is identical and simultaneously it connects, the Download printed style of writing does not become 8. Component Off-Set adjustment Input the signal to HD-STB(SK-010T) and receive 14Ch. 8-1. Required Equipment HD-STB (SK-010T or same product) 8-2. Manual Adjustment of Off-Set (1) Input Video signal and Component 720P, 1080i signal of HD-STB into Video and Component input part. (2) Select Twin Picture by pressing ADJ twice on R/C, check component in the main picture and Video in the sub picture. (3) Adjust the G-OFFSET is identical "2" the degree which is visible of component(Main picture) and Video Input(Sub picture) by pressing Volume +, - key. (4) Adjust the R-OFFSET, B-OFFSET color impression of component(Main picture) and external Input(Sub picture) same by pressing Volume +,- key. - 19 -