Zenith Z32LC6D Operation Guide - Page 88
Transmission, Acknowledgement, TransmissiOn
UPC - 719192172906
View all Zenith Z32LC6D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Data 5: The table above lists the binary code which must be converted to Hexadecimal before sending. For example: 23. Channel Add/Del (Command: m b) To add and delete the channels The binary code to tune the sub source to an NTSC cable channel is "1000 0001 ", which translates to "81" in Hex. * 7th bit: For which source do you want to change the channel. * 6th bit: Use a two part or one part channel. Most cases just use 0 since it's ignored when using NTSC. * 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn't matter what the physical number is. Transmission [m] [b][] [Set ID] [ ] [Data] [Cr] Data 0: Channel Delete Data 1: Channel Add Acknowledgement [b][ ][Set ID][ ][0KING] [Data] [x] 24. Key (Command: m c) To send IR remote key code. TransmissiOn [m] [c][] [Set ID] [] [Data] [cr] Data Key code: Refer to page 80. Acknowledgement [c][ ][Set ID][ ][OK/NG] [Data] [x] * 4th bit: Set to 0. * 3-0 bits: Choose signal type. 25. Back Light (Command: m g) To adjust screen back light. Transmission [m] [g][] [Set iD] [ ] [Data] [Cr] * Tune Command Examples: Data Min: 0 - Max: 64 (*transmit by Hexadecimal code) 1. Tune to the analog (NTSC) cable channel 35. *Refer to 'Real data mapping 1'. See page 85. Data 0= Physical of 35 = 23 Acknowledgemen_ [g] [ ] [Set ID] [ ][OK/NG] [Data] [x] Data 1 & 2 = No Major = 00 00 Data 3 & 4 = No Minor = 00 00 m Z Data 5 = 0000 0001 in binary = 01 C7 Total = ma 00 23 00 00 00 00 01 X 2. Tune to the digital (ATSC) local channel 30-3. Data 0 = Don't know Physical = 00 Data 1 &2 = Major is 30 = 00 1E Data3 &4=Minoris3 = 0003 Data 5 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 ACknoW!edgerneni [a][] [set !D][] [OK] [DataO] [Data ! ] [Data2] [Data3] [Data4] [X] [a][] [Set ID NG] [DataO] [x] 87