ZyXEL EMG3425 User Guide - Page 92
IGMP Snooping Screen
View all ZyXEL EMG3425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Chapter 10 LAN Table 33 Network > LAN > IPv6 LAN (continued) LABEL Autoconfiguration Type DESCRIPTION Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in the network. Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The IP address information gets through DHCPv6. Static IP Address Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network addresses, prefixes and other configuration information to DHCP clients. Select this option to manually enter an IPv6 address if you want to use a static IP address. LAN IPv6 Address Enter the LAN IPv6 address you want to assign to your EMG3425-Q10A in hexadecimal notation. LAN IPv6 Prefix Length (48~64) Enter the 48 to 64 address prefix length to specify in an IPv6 address compose the network address. Prefix Preferred Lifetime Enter the preferred lifetime for the prefix. Prefix Valid Lifetime Enter the valid lifetime for the prefix. Link Local Only Select this option to only use the link local address on the EMG3425-Q10A interfaces in the LAN. ULA Select this option to identify a unique local address of the EMG3425-Q10A in the LAN. Apply Click Apply to save your changes with the EMG3425-Q10A. Cancel Click Cancel to begin configuring this screen afresh. 10.7 IGMP Snooping Screen Use this screen to enable IGMP Snooping and configure IGMP mode. Click Network > LAN > IGMP Snooping. Figure 51 Network > LAN > IGMP Snooping The following table describes the labels on this screen. Table 34 Network > LAN > IGMP Snooping LABEL DESCRIPTION IGMP Snooping EMG3425-Q10A User's Guide 92