ZyXEL MAX218MW User Guide - Page 197
Troubleshooting, 13.1 Power, Hardware Connections, and LEDs, Power
View all ZyXEL MAX218MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
CHAPTER 13 Troubleshooting This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories: • Power, Hardware Connections, and LEDs • WiMAX Device Access and Login • Internet Access • Reset the WiMAX Device to Its Factory Defaults 13.1 Power, Hardware Connections, and LEDs The WiMAX Device does not turn on. None of the LEDs turn on. 1 Make sure you are using the power adapter or cord included with the WiMAX Device. 2 Make sure the power adapter or cord is connected to the WiMAX Device and plugged in to an appropriate power source. Make sure the power source is turned on. 3 Disconnect and re-connect the power adapter or cord to the WiMAX Device. 4 If the problem continues, contact the vendor. One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Chapter 14 on page 203 for more information. 2 Check the hardware connections. See the Quick Start Guide. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adapter to the WiMAX Device. 5 If the problem continues, contact the vendor. WiMAX Device Configuration User's Guide 197