ZyXEL MAX218MW User Guide - Page 57
ZyXEL MAX218MW Manual
View all ZyXEL MAX218MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 4 Tutorials Note: You will need to configure the VLAN supporting switches to tag the received packets with the appropriate VLAN IDs. For example, packets received on switch S1 from PC B on the LAN would be tagged to VLAN 5. Figure 19 VLAN Configuration Example 4 No VLAN Tag VLAN TagID = 5 A VLAN TagID = 5 S1 No VLAN Tag B User Network No VLAN Tag PC Manager IP: Enable VLAN LAN: Transparent VLAN Tag ID=5 CPE Note: Manager IP VLAN ID is the same as the LAN transparent VLAN ID LAN VLAN Tag ID=5 Manager IP VLAN Tag ID=5 Network operators 1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking each row. Then press OK. WiMAX Device Configuration User's Guide 57
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
57
Note: You will need to configure the VLAN supporting switches to tag the received packets
with the appropriate VLAN IDs. For example, packets received on switch S1 from PC
B on the LAN would be tagged to VLAN 5.
Figure 19
VLAN Configuration Example 4
1
Configure the
Link Type
,
PVID
and
Tag/Untag
settings for the interfaces as below by clicking
each row. Then press
OK
.
A
VLAN TagID = 5
VLAN TagID = 5
B
S1
No VLAN Tag
No VLAN Tag
CPE
LAN
Manager IP
No VLAN Tag
User Network
PC
Network
operators
Manager IP: Enable VLAN
LAN: Transparent
Note: Manager IP VLAN ID is the same
as the LAN transparent VLAN ID
VLAN Tag ID=5
VLAN Tag ID=5
VLAN Tag ID=5