ZyXEL MES-3528 User Guide - Page 188
Table 54
View all ZyXEL MES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Chapter 23 Multicast Click Advanced Applications > Multicast > Multicast Setting > IGMP Filtering Profile link to display the screen as shown. Figure 101 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile The following table describes the labels in this screen. Table 54 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile LABEL Profile Name DESCRIPTION Enter a descriptive name for the profile for identification purposes. Start Address End Address To configure additional rule(s) for a profile that you have already added, enter the profile name and specify a different IP multicast address range. Type the starting multicast IP address for a range of multicast IP addresses that you want to belong to the IGMP filter profile. Type the ending multicast IP address for a range of IP addresses that you want to belong to the IGMP filter profile. Add Clear Profile Name Start Address End Address If you want to add a single multicast IP address, enter it in both the Start Address and End Address fields. Click Add to save the profile to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the nonvolatile memory when you are done configuring. Click Clear to clear the fields to the factory defaults. This field displays the descriptive name of the profile. This field displays the start of the multicast address range. This field displays the end of the multicast address range. 188 MES-3528 User's Guide