ZyXEL MGS-3712 User Guide - Page 116

Chapter 10 Static MAC Forward Setup Click Advanced Applications > Static MAC Forwarding in the navigation panel to display the configuration screen as shown. Figure 60 Advanced Application > Static MAC Forwarding 116 The following table describes the labels in this screen. Table 21 Advanced Application > Static MAC Forwarding LABEL DESCRIPTION Active Select this check box to activate your rule. You may temporarily deactivate a rule without deleting it by clearing this check box. Name Enter a descriptive name for identification purposes for this static MAC address forwarding rule. MAC Address Enter the MAC address in valid MAC address format, that is, six hexadecimal character pairs. Note: Static MAC addresses do not age out. VID Enter the VLAN identification number. Port Enter the port where the MAC address entered in the previous field will be automatically forwarded. Add Click Add to save your rule to the Switch's run-time memory. The Switch loses this rule if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields to their last saved values. Clear Click Clear to begin configuring this screen afresh. Index Click an index number to modify a static MAC address rule for a port. Active This field displays whether this static MAC address forwarding rule is active (Yes) or not (No). You may temporarily deactivate a rule without deleting it. Name This field displays the descriptive name for identification purposes for this static MAC address-forwarding rule. MAC Address This field displays the MAC address that will be forwarded and the VLAN identification number to which the MAC address belongs. MGS-3712/MGS-3712F User's Guide