ZyXEL MGS-3712F User Guide - Page 264

Chapter 27 Loop Guard The following table describes the labels in this screen. Table 86 Advanced Application > Loop Guard LABEL DESCRIPTION Active Select this option to enable loop guard on the Switch. Port * The Switch generates syslog, internal log messages as well as SNMP traps when it shuts down a port via the loop guard feature. This field displays the port number. Use this row to make the setting the same for all ports. Use this row first and then make adjustments on a port-by-port basis. Active Apply Cancel Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable the loop guard feature on this port. The Switch sends probe packets from this port to check if the switch it is connected to is in loop state. If the switch that this port is connected is in loop state the Switch will shut down this port. Clear this check box to disable the loop guard feature. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the nonvolatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 264 MGS-3712/MGS-3712F User's Guide