ZyXEL MGS-3712F User Guide - Page 298

Chapter 33 Maintenance Table 99 Management > Maintenance (continued) LABEL DESCRIPTION Load Factory Default Click Click Here to reset the configuration to the factory default settings. Save Configuratio n Click Config 1 to save the current configuration settings to Configuration 1 on the Switch. Click Config 2 to save the current configuration settings to Configuration 2 on the Switch. Reboot System Click Config 1 to reboot the system and load Configuration 1 on the Switch. Click Config 2 to reboot the system and load Configuration 2 on the Switch. Note: Make sure to click the Save button in any screen to save your settings to the current configuration on the Switch. 33.2 Load Factory Default Follow the steps below to reset the Switch back to the factory defaults. 1 In the Maintenance screen, click the Click Here button next to Load Factory Default to clear all Switch configuration information you configured and return to the factory defaults. 2 Click OK to reset all Switch configurations to the factory defaults. Figure 164 Load Factory Default: Start 3 In the web configurator, click the Save button in the top of the screen to make the changes take effect. If you want to access the Switch web configurator again, you may need to change the IP address of your computer to be in the same subnet as that of the default Switch IP address (192.168.1.1). 33.3 Save Configuration Click Config 1 to save the current configuration settings permanently to Configuration 1 on the Switch. 298 MGS-3712/MGS-3712F User's Guide