ZyXEL NWA1123-AC HD User Guide - Page 37
Nwa1123-ac Hd, Color, Status, Description
View all ZyXEL NWA1123-AC HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 3 Hardware Table 9 WAC6303D-S and NWA5123-AC HD LED (continued) COLOR STATUS DESCRIPTION Amber Green Blinks amber and green alternatively 2 times and then turns solid green for 3 seconds. The Zyxel Device is managed by an AC but the uplink is disconnected. Green Slow Blinking (On for 1 second, Off for 1 second) The wireless module of the Zyxel Device is disabled or fails, the Zyxel Device is using default wireless settings, or the Zyxel Device is configured to be managed by NCC but is not yet registered with the NCC. Green Steady On The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in full power mode (see Table 26 on page 67). Amber Steady On The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in limited power mode (see Table 26 on page 67). Bright Blue Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in full power mode (see Table 26 on page 67). White Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in limited power mode (see Table 26 on page 67). Slow Blinking (On for 100ms per second) Locator LED is on. It switches off automatically after the configured amount of time (1-60 min). Default duration is 10 minutes. Blue Slow Blinking (Blink for 1 time, Off for 1 second) The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. Red On The Zyxel Device failed to boot up or is experiencing system failure. Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) The Zyxel Device is undergoing firmware upgrade. Slow Blinking (Blink for 3 times, Off for 3 seconds) The Uplink port of the Zyxel Device in standalone mode is disconnected. 3.2.3 NWA1123-AC HD The following are the LED descriptions for your NWA1123-AC HD. NWA/WAC/WAX Series User's Guide 37