ZyXEL NWA1123-AC HD User Guide - Page 44
Nwa1302-ac, Led On, Color, Status, Description
View all ZyXEL NWA1123-AC HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 3 Hardware Table 13 NWA1123-AC PRO LEDs (continued) LED COLOR STATUS Management Green On Slow Blinking (On for 1 sec, Off for 1 sec) WLAN WLAN UPLINK Amber Green Amber Green Green Amber Green Amber Amber Blinks amber for 1 second and green for 1 second alternatively Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. Off On On Off On On Off On Blinking Green On Blinking LAN Locator Amber Green White Off On Blinking On Blinking Off Blinking Off DESCRIPTION The Zyxel Device is managed by the NCC. The Zyxel Device is using default wireless settings, or the Zyxel Device is connected to the NCC but is unregistered with the NCC. The Zyxel Device is searching for (discovering) the NCC. The NCC is connecting to the registered Zyxel Device. The Zyxel Device is in standalone mode. The 2.4 GHz radio is set to "Ceiling" and is active The 2.4 GHz radio is set to "Wall" and is active The 2.4 GHz WLAN is not active. The 5 GHz radio is set to "Ceiling" and is active The 5 GHz radio is set to "Wall" and is active The 5 GHz WLAN is not active. The port is operating as a 100 Mbps connection. The Zyxel Device is sending/receiving data through the port at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The Zyxel Device is sending/receiving data through the port at 1 Gbps. The port is not connected. The port is operating as a 100 Mbps connection. The LAN port is sending/receiving data at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The LAN port is sending/receiving data at 1 Gbps. The LAN port is not connected. The Locator is activated and will blink to show the actual location of the Zyxel Device between several devices in the network. The Locator function is off. 3.3.2 NWA1302-AC By default, the LEDs automatically turn on when the NWA1302-AC is ready. If the LEDs are turned off by the NCC, you can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes. NWA/WAC/WAX Series User's Guide 44