ZyXEL P-202H Plus User Guide - Page 206
Callback Overview
View all ZyXEL P-202H Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
P-202H Plus v2 User's Guide Table 71 Menu 13 Default Dial-in Setup FIELD Edit Filter Sets DESCRIPTION Press [SPACE BAR] and then [ENTER] to select Yes to edit the filter sets. Keep in mind that the filter set(s) will only apply to remote dial-in users but not the remote nodes. Note: Spaces and [-] symbol are accepted in this field. For more information on customizing your filter sets, see Chapter 25 on page 234. The default is blank, i.e., no filters. Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at any time to cancel. 22.3.1 Default Dial-in Filter Use Menu 13.1 - Default Dial-in Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between all dial-in users and your ZyXEL Device. Note that the filter set(s) only applies to the dial-in users but not the remote nodes. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field. The default is no filters. Spaces are accepted in this field. For more information on defining the filters, see the filters chapter. Figure 98 Menu 13.1 Default Dial-in Filter Menu 13.1 - Default Dial-in Filter Input Filter Sets: protocol filters= device filters= Output Filter Sets: protocol filters= device filters= Press ENTER to Confirm or ESC to Cancel: 22.4 Callback Overview Callback serves two purposes. One is security. When set to callback to a fixed number, an intruder will not gain access to your network even if he/she stole the password from your user, because the ZyXEL Device always calls back to the pre-configured number. 205 Chapter 22 Dial-in Setup