ZyXEL P-2602HW-61 User Guide - Page 259
Bandwidth Management Rule Setup
View all ZyXEL P-2602HW-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
P-2602H(W)(L)-DxA Series User's Guide Table 101 Media Bandwidth Management: Summary (continued) LABEL Max Bandwidth Usage Apply Cancel DESCRIPTION Select this check box to have the ZyXEL Device divide up all of the interface's unallocated and/or unused bandwidth among the bandwidth classes that require bandwidth. Do not select this if you want to reserve bandwidth for traffic that does not match a bandwidth class or you want to limit the transmission speed of this interface (see the Speed field description). Click Apply to save your settings back to the ZyXEL Device. Click Cancel to begin configuring this screen afresh. 19.8 Bandwidth Management Rule Setup You must use the Bandwidth Management Summary screen to enable bandwidth management on an interface before you can configure rules for that interface. Click Advanced > Bandwidth MGMT > Rule Setup to open the following screen. Figure 137 Bandwidth Management: Rule Setup The following table describes the labels in this screen. Table 102 Bandwidth Management: Rule Setup LABEL Direction Service Priority DESCRIPTION Select LAN to apply bandwidth management to traffic that the ZyXEL Device forwards to the LAN. Select WAN to apply bandwidth management to traffic that the ZyXEL Device forwards to the WAN. Select WLAN to apply bandwidth management to traffic that the ZyXEL Device forwards to the WLAN. Select a service for your rule or you can select User define to go to the screen where you can define your own. Select a priority from the drop down list box. Choose High, Mid or Low. Chapter 19 Bandwidth Management 259