ZyXEL P-2612HNU-F3 User Guide - Page 125
Table 15
View all ZyXEL P-2612HNU-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 6 Wireless In order to configure and enable WEP encryption, click Network Settings > Wireless to display the General screen. Select Basic as the security level. Then select Static WEP or Shared WEP from the Security Mode list. Figure 25 Wireless > General: Basic (Static WEP/Shared WEP) The following table describes the labels in this screen. Table 15 Wireless > General: Basic (Static WEP/Shared WEP) LABEL Security Mode WEP Key DESCRIPTION Choose Static WEP or Shared WEP from the drop-down list box. • Select Static WEP to have the ZyXEL Device allow association with wireless clients that use Open System mode. Data transfer is encrypted as long as the wireless client has the correct WEP key for encryption. The ZyXEL Device authenticates wireless clients using Shared Key mode that have the correct WEP key. • Select Shared WEP to have the ZyXEL Device authenticate only those wireless clients that use Shared Key mode and have the correct WEP key. Enter a WEP key that will be used to encrypt data. Both the ZyXEL Device and the wireless stations must use the same WEP key for data transmission. If you want to manually set the WEP key, enter any 5 or 13 characters (ASCII string) or 10 or 26 hexadecimal characters ("0-9", "A-F") for a 64bit or 128-bit WEP key respectively. P-2612HNU(L)-FxF User's Guide 125