ZyXEL P-2612HNU-F3 User Guide - Page 193
Table 41
View all ZyXEL P-2612HNU-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Chapter 10 Quality of Service (QoS) Table 41 Class Setup: Add/Edit (continued) LABEL Exclude Destination MAC Address MAC Mask DESCRIPTION Select this option to exclude the packets that match the specified criteria from this classifier. Select the check box and enter the destination MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. IP Address IP Subnet Mask Port Range Exclude Others IP Protocol Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. Select the check box and enter the destination IP address in dotted decimal notation. A blank source IP address means any source IP address. Enter the destination subnet mask. If you select TCP or UDP in the IP Protocol field, select the check box and enter the port number(s) of the source. Select this option to exclude the packets that match the specified criteria from this classifier. This field is available only when you select IP in the Ether Type field. IP Packet Length DSCP Select this option and select the protocol (service type) from TCP or UDP. If you select User defined, enter the protocol (service type) number. This field is available only when you select IP in the Ether Type field. Select this option and enter the minimum and maximum packet length (from 46 to 1504) in the fields provided. This field is available only when you select IP in the Ether Type field. TCP ACK Select this option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in the field provided. This field is available only when you select IP in the Ether Type field. If you select this option, the matched TCP packets must contain the ACK (Acknowledge) flag. P-2612HNU(L)-FxF User's Guide 193