ZyXEL P-2612HNU-F3 User Guide - Page 27
LED Descriptions
View all ZyXEL P-2612HNU-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 1 Introduction Table 1 LED Descriptions LED WLAN/ WPS DSL WAN INTERNET COLOR Green Orange Off Green Off Green Off Green STATUS On Blinking Blinking On Blinking On Blinking On DESCRIPTION The wireless network is activated and is operating in IEEE 802.11 mode. The ZyXEL Device is communicating with other wireless clients. The WPS connection is being configured. The wireless network is not activated. This light applies when the ZyXEL Device is in DSL WAN mode. The DSL line is up. The ZyXEL Device is attempting to synchronize DSL signal. The DSL line is down. This light applies when the ZyXEL Device is in Ethernet WAN mode. The ZyXEL Device has an Ethernet connection with a device on the WAN. The ZyXEL Device is sending/receiving data to/from the WAN. The ZyXEL Device does not have an Ethernet connection with the WAN. The ZyXEL Device has an IP connection but no traffic. PHONE USB Red Off Green Orange Off Green/ Orange Off Blinking On On Blinking On Blinking On Blinking Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used). The ZyXEL Device is sending or receiving IP traffic. The ZyXEL Device attempted to make an IP connection but failed. Possible causes are no response from a DHCP server, no PPPoE response, PPPoE authentication failed. The ZyXEL Device does not have an IP connection. A SIP account is registered for the phone port. A telephone connected to the phone port has its receiver off of the hook or there is an incoming call. A SIP account is registered for the phone port and there is a voice message in the corresponding SIP account. A telephone connected to the phone port has its receiver off of the hook and there is a voice message in the corresponding SIP account. The phone port does not have a SIP account registered. The ZyXEL Device recognizes a USB connection but there is no traffic. The ZyXEL Device is sending/receiving data to /from the USB device connected to it. The ZyXEL Device does not detect a USB connection. Refer to the Quick Start Guide for information on hardware connections. P-2612HNU(L)-FxF User's Guide 27