ZyXEL P-2612HNU-F3F User Guide - Page 144
ZyXEL P-2612HNU-F3F Manual
View all ZyXEL P-2612HNU-F3F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 6 Wireless The following figure shows a WPS-enabled client (installed in a notebook computer) connecting to a WPS-enabled access point. Figure 35 How WPS works ACTIVATE WPS WITHIN 2 MINUTES ACTIVATE WPS WPS HANDSHAKE ENROLLEE SECURE TUNNEL REGISTRAR SECURITY INFO COMMUNICATION The roles of registrar and enrollee last only as long as the WPS setup process is active (two minutes). The next time you use WPS, a different device can be the registrar if necessary. The WPS connection process is like a handshake; only two devices participate in each WPS transaction. If you want to add more devices you should repeat the process with one of the existing networked devices and the new device. Note that the access point (AP) is not always the registrar, and the wireless client is not always the enrollee. All WPS-certified APs can be a registrar, and so can some WPS-enabled wireless clients. By default, a WPS devices is "unconfigured". This means that it is not part of an existing network and can act as either enrollee or registrar (if it supports both functions). If the registrar is unconfigured, the security settings it transmits to the enrollee are randomly-generated. Once a WPS-enabled device has connected to another device using WPS, it becomes "configured". A configured wireless client can still act as enrollee or registrar in subsequent WPS connections, but a configured access point can no longer act as enrollee. It will be the registrar in all subsequent WPS connections in which it is involved. If you want a configured AP to act as an enrollee, you must reset it to its factory defaults. 144 P-2612HNU(L)-FxF User's Guide