ZyXEL P-2612HNU-F3F User Guide - Page 189
Add/Edit a QoS Queue
View all ZyXEL P-2612HNU-F3F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Chapter 10 Quality of Service (QoS) Table 38 Network Setting > QoS > Queue Setup (continued) LABEL DESCRIPTION Apply Click Apply to save your changes. Cancel Click Cancel to restore your previously saved settings. 10.3.1 Add/Edit a QoS Queue Use this screen to configure a queue. Click Add new queue in the Queue Setup screen or the Edit icon next to an existing queue. Figure 71 Queue Setup: Add/Edit The following table describes the labels in this screen. Table 39 Queue Setup: Add/Edit LABEL Active Name Interface Priority DESCRIPTION Select to enable or disable this queue. Enter the descriptive name of this queue. Select the interface to which this queue is applied. Select the priority level (from 1 to 7) of this queue. Weight The larger the number, the higher the priority level. Traffic assigned to higher priority queues gets through faster while traffic in lower priority queues is dropped if the network is congested. Select the weight (from 1 to 15) of this queue. Rate Limit Apply Back If two queues have the same priority level, the ZyXEL Device divides the bandwidth across the queues according to their weights. Queues with larger weights get more bandwidth than queues with smaller weights. Specify the maximum transmission rate (in Kbps) allowed for traffic on this queue. Click Apply to save your changes. Click Back to return to the previous screen without saving. P-2612HNU(L)-FxF User's Guide 189