ZyXEL P-2812HNU-F1 User Guide - Page 34
Switch WAN Interface, Network Setting > Broadband, Add new, WAN Interface - ip
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 3 Tutorials 2 Select ADSL as your WAN mode type and click Switch WAN Interface. 3 Confirm your selection and wait for the Device to reboot. 4 Log into the Device again and go to the Network Setting > Broadband screen. Click Add new WAN Interface. 5 For this example, the interface type is ADSL and the connection has the following information. General Name MyDSLConnection Type ADSL Mode Routing WAN Service Type PPPoE ATM PVC Configuration VPI/VCI 36/48 Encapsulation Mode LLC/SNAP-Bridging Service Category UBR without PCR PPP Information PPP User Name [email protected] PPP Password ABCDEF! PPPoE Service Name My DSL Authentication Method Auto Static IP Address 192.168.1.32 Others PPPoE Passthrough: Disabled NAT: Enabled IGMP Multicast Proxy: Enabled Apply as Default Gateway: Enable DNS Server: Static DNS IP Address (Primary: 192.168.1.254 Secondary: 192.168.1.253) 34 P-2812HNU(L)-Fx Series User's Guide