ZyXEL P-330W User Guide - Page 50

Table 17 - router manual

Page 50 highlights

Figure 24 Wireless: Basic Settings ZyXEL P-330W User's Guide The following table describes the basic wireless LAN labels in this screen. Table 17 Wireless: Basic Settings LABEL DESCRIPTION Disable Access Select this check box to disable the wireless LAN capabilities of your P-330W. Point Band Choose the operating mode of your wireless access point. 2.4Ghz (B+G) offers the greatest compatibility. 2.4 GHz (B) will only allow 802.11b clients to connect to the wireless LAN. 2.4 GHz (G) will only allow 802.11g clients to connect to the wireless LAN. Mode Mode allows you to change the wireless behavior of the P-330W. AP allows wireless clients to connect to the P-330W. Client mode activates the Wireless ISP mode of the router. Use this mode to connect to a WISP or metro-area wireless network. Network Type Used when operating in Client mode. This allows you to switch between Infrastructure and Ad Hoc networking modes. SSID (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Note: If you are configuring the P-330W from a computer connected to the wireless LAN and you change the P-330W's SSID or WEP settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the P-330W's new settings. Channel Number To manually set the P-330W to use a channel, select a channel from the drop-down list box. Associated Clients Click Show Active Clients to be shown a list of wireless clients currently connected to the Wireless LAN Save Reset Click Save to save your changes back to the P-330W. Click Reset to reload the previous configuration for this screen. Chapter 5 Wireless 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

ZyXEL P-330W User’s Guide
Chapter 5 Wireless
50
Figure 24
Wireless: Basic Settings
The following table describes the basic wireless LAN labels in this screen.
Table 17
Wireless: Basic Settings
LABEL
DESCRIPTION
Disable Access
Point
Select this check box to disable the wireless LAN capabilities of your P-330W.
Band
Choose the operating mode of your wireless access point.
2.4Ghz (B+G)
offers the
greatest compatibility.
2.4 GHz (B)
will only allow 802.11b clients to connect to the
wireless LAN.
2.4 GHz (G)
will only allow 802.11g clients to connect to the wireless
LAN.
Mode
Mode allows you to change the wireless behavior of the P-330W.
AP
allows wireless
clients to connect to the P-330W.
Client
mode activates the Wireless ISP mode of
the router.
Use this mode to connect to a WISP or metro-area wireless network.
Network Type
Used when operating in Client mode.
This allows you to switch between
Infrastructure
and
Ad Hoc
networking modes.
SSID
(Service Set IDentity) The SSID identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Note:
If you are configuring the P-330W from a computer connected
to the wireless LAN and you change the P-330W’s SSID or WEP
settings, you will lose your wireless connection when you press Apply
to confirm. You must then change the wireless settings of your
computer to match the P-330W’s new settings.
Channel
Number
To manually set the P-330W to use a channel, select a channel from the drop-down
list box.
Associated
Clients
Click
Show Active Clients
to be shown a list of wireless clients currently connected
to the Wireless LAN
Save
Click
Save
to save your changes back to the P-330W.
Reset
Click
Reset
to reload the previous configuration for this screen.