ZyXEL P-870HW-51a v2 Quick Start Guide - Page 10

WLAN Setup with WPS This section applies to the P-870HW Series only. You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless network and add wireless devices to your wireless network at the touch of a button. The other wireless devices must also support WPS. Look for the WPS logo on the housing of your device. 1. Place a WPS-enabled device within range of the P-870HW Series. 2. Press the WPS WLAN ON/OFF button ( ) on the P-870HW Series for five seconds. Press the WPS button on another WPS-enabled device. It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. Your P-870HW Series allows the PBC (Push Button Configuration) method, as well as the PIN (Personal Identification Number) configuration via the web configurator. See your User's Guide for more information. Other WPS-enabled devices should provide at least one similar method. 3. The WLAN/WPS LED ( ) on the P-870HW Series blinks for a few seconds, then shines steadily, indicating your devices are connected. 4. To add another WPS-enabled device to your wireless network, press the WPS buttons on your P-870HW Series and your next WPSenabled device. Congratulations! You are now ready to connect to the Internet wirelessly through your P-870HW Series. 10