ZyXEL P-870HW-51a v2 Quick Start Guide - Page 5
Hardware Connections
 |
View all ZyXEL P-870HW-51a v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Hardware Connections This section shows you how to set up your P-870H/HW Series. 1. DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if one is already installed). 2. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. 3. Use the power adaptor provided with your P-870H/HW Series to connect an appropriate power source to this socket. 4. Attach the antenna onto the P-870HW Series. The antenna is not available on the P-870H Series. 5. Push the power switch to the on position. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
5
Hardware Connections
This section shows you how to set up your P-870H/HW Series.
1.
DSL
: Use a telephone wire to connect this port to a telephone jack (or
the
DSL
or
MODEM
jack on a splitter, if one is already installed).
2.
ETHERNET 1-4
: Use an Ethernet cable to connect a computer to this
port for initial configuration and/or Internet access.
3.
Use the power adaptor provided with your P-870H/HW Series to
connect an appropriate power source to this socket.
4.
Attach the antenna onto the P-870HW Series. The antenna is not
available on the P-870H Series.
5.
Push the power switch to the on position.