ZyXEL PLA5405 User Guide - Page 7

Leds, Table 3, Lights, Color, Status, Description - user guide

Get ZyXEL PLA5405 PDF manuals and user guides View all ZyXEL PLA5405 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Chapter 1 Introducing the PLA Note: In this guide RESET/ENCRYPT refers to the ENCRYPT button in PLAs that have separate RESET and ENCRYPT buttons. You can directly plug an electrical device (such as a router or computer) into PLAs with an AC power pass-through socket to supply power to the device. There are two types of hardware for each of the PLA4101 and PLA4201 v2 models: • One has an Ethernet port on the top and a power plug at the bottom of the rear panel. • One has an Ethernet port on the bottom and a power plug at the top of the rear panel. The power plug varies depending on your region. 1.2 LEDs The following sections describes the lights on the PLA. The following figure is the front panel of the PLA. Use the lights to determine if the PLA is behaving normally or if there are some problems on your powerline network. Figure 1 PLA Lights The following table describes the behavior of the lights on the PLA. Table 3 LEDs: 200 Mbps Models LIGHTS ICON COLOR STATUS POWER Green On Blinking Off DESCRIPTION The PLA is on and receiving power. It also indicates a successful connection using the RESET/ ENCRYPT button. It indicates the PLA is trying to connect with another device using the ENCRYPT function. The Power LED blinks when it is in standby mode. Refer to Section 1.3 on page 9 for details on this feature. The PLA is not receiving power. PLA Series User's Guide 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Chapter 1 Introducing the PLA
PLA Series User’s Guide
7
Note: In this guide
RESET/ENCRYPT
refers to the
ENCRYPT
button in PLAs that have
separate
RESET
and
ENCRYPT
buttons.
You can directly plug an electrical device (such as a router or computer) into PLAs with an AC power
pass-through socket to supply power to the device.
There are two types of hardware for each of the PLA4101 and PLA4201 v2 models:
•
One has an Ethernet port on the top and a power plug at the bottom of the rear panel.
•
One has an Ethernet port on the bottom and a power plug at the top of the rear panel.
The power plug varies depending on your region.
1.2
LEDs
The following sections describes the lights on the PLA.
The following figure is the front panel of the PLA. Use the lights to determine if the PLA is behaving
normally or if there are some problems on your powerline network.
Figure 1
PLA Lights
The following table describes the behavior of the lights on the PLA.
Table 3
LEDs: 200 Mbps Models
LIGHTS
ICON
COLOR
STATUS
DESCRIPTION
POWER
Green
On
The PLA is on and receiving power.
It also indicates a successful connection using the
RESET/
ENCRYPT
button.
Blinking
It indicates the PLA is trying to connect with another device
using the ENCRYPT function.
The
Power
LED blinks when it is in standby mode. Refer to
Section 1.3 on page 9
for details on this feature.
Off
The PLA is not receiving power.