Home » ZyXEL Manuals » Network Security & Firewall Devices » ZyXEL USG 200/100-PLUS/100/50 » Manual Viewer

ZyXEL USG 200/100-PLUS/100/50 User Guide - Page 225

Log / Report, VPN2S User's Guide, Table 101

View all ZyXEL USG 200/100-PLUS/100/50 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 225 highlights

Chapter 15 Log / Report Table 101 Configuration > Log / Report > Log Settings > Edit (System and Email) LABEL DESCRIPTION TLS Security Security Select the check box if you want encrypted communications between the mail server and the VPN2S. Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS). Mail Subject Alert Mail Subject Send From Send Log to Send Alerts to Sending Log Day for Sending Log Time for Sending Log SMTP Authentication Username Password Retype to Confirm Log Consolidation Enable Log Consolidation Interval (seconds) Log Settings System Log Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS. Type the subject line for the outgoing e-mail. Type the subject line for the outgoing alert e-mail. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address to which the outgoing e-mail is delivered. Type the e-mail address to which alerts are delivered. Select how often log information is e-mailed. Choices are: When Full, Hourly and When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full. This field is available if the log is e-mailed weekly. Select the day of the week the log is emailed. This field is available if the log is e-mailed weekly, daily or hourly. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. Select this check box if it is necessary to provide a user name and password to the SMTP server. This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Type the password again to make sure that you have entered is correctly. Select this to activate log consolidation. Log consolidation aggregates multiple log messages that arrive within the specified Log Consolidation Interval. In the Log Viewer tab, the text "[count=x]", where x is the number of original log messages, is appended at the end of the Message field, when multiple log messages were aggregated. Type how often, in seconds, to consolidate log information. If the same log message appears multiple times, it is aggregated into one log message with the text "[count=x]", where x is the number of original log messages, appended at the end of the Message field. Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the VPN2S will e-mail logs to them. enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The VPN2S does not e-mail debugging information, even if this setting is selected. VPN2S User's Guide 225

Section	Page
VPN2S	1
Document Conventions	3
Contents Overview	4
Table of Contents	5
User’s Guide	13
Introducing the VPN2S	14
1.1 Overview	14
1.2 Registration at myZyxel	14
1.3 Ways to Manage the VPN2S	15
1.4 Good Habits for Managing the VPN2S	16
1.5 Applications for the VPN2S	16
1.5.1 Internet Access	16
1.5.2 VPN2S’s USB Support	17
1.5.3 IPv6 Routing	18
1.5.4 VPN Connectivity	18
1.5.5 Load Balancing	19
1.6 LEDs (Lights)	19
1.7 The RESET Button	21
The Web Configurator	22
2.1 Overview	22
2.1.1 Accessing the Web Configurator	22
2.2 Web Configurator Layout	24
2.2.1 Title Bar	25
2.2.2 Navigation Panel	25
2.2.3 Main Window	28
Wizard	29
3.1 Overview	29
3.2 Wizard Basic Setup	30
3.3 Wizard IPsec VPN Setup	35
3.3.1 VPN Express Settings	36
3.3.2 VPN Advanced Settings	38
3.4 Wizard IPv6 Setup	43
Technical Reference	47
Dashboard	48
4.1 Overview	48
4.2 The Dashboard Screen	48
WAN/Internet	51
5.1 Overview	51
5.1.1 What You Can Do in this Chapter	52
5.1.2 What You Need to Know	52
5.1.3 Before You Begin	54
5.2 The WAN Status Screen	55
5.3 The WAN Setup Screen	55
5.3.1 Internet Connection: Add/Edit	56
5.4 The Mobile Screen	64
5.5 The Port Setting Screen	68
5.6 The Multi-WAN Screen	69
5.6.1 Multi-WAN: Edit	70
5.6.2 How to Configure Multi-WAN for Load Balancing and Failover	71
5.7 The Dynamic DNS screen	72
5.7.1 Dynamic DNS: Add/Edit	73
5.8 Technical Reference	75
LAN	78
6.1 Overview	78
6.1.1 What You Can Do in this Chapter	78
6.1.2 What You Need To Know	79
6.1.3 Before You Begin	80
6.2 The LAN Status Screen	80
6.3 The LAN Setup Screen	81
6.3.1 LAN Setup: Edit	82
6.3.2 LAN Setup IPv6: Edit	84
6.4 The Static DHCP Screen	87
6.4.1 Static DHCP: Add/Edit	87
6.5 The Additional Subnet Screen	89
6.6 The Wake on LAN Screen	89
6.6.1 Wake On LAN: Add/Edit	90
6.7 The VLAN / Interface Group Screen	91
6.7.1 VLAN / Interface Group: Add/Edit	92
6.8 The DNS Entry Screen	97
6.9 The DNS Forwarder Screen	97
6.9.1 DNS Forwarder: Add/Edit	98
6.10 Technical Reference	99
6.10.1 LANs, WANs and the VPN2S	99
6.10.2 DHCP Setup	99
6.10.3 DNS Server Addresses	100
6.10.4 LAN TCP/IP	100
Routing	102
7.1 Overview	102
7.1.1 What You Can Do in this Chapter	102
7.2 The Routing Status Screen	103
7.3 The Policy Route Screen	109
7.3.1 Policy Route: Add/Edit	110
7.4 The Static Route Screen	112
7.4.1 Static Route: Add/Edit	113
7.5 The RIP Screen	114
Network Address Translation (NAT)	116
8.1 Overview	116
8.1.1 What You Can Do in this Chapter	116
8.1.2 What You Need To Know	116
8.2 The Port Forwarding Screen	117
8.2.1 Port Forwarding: Add/Edit	119
8.3 The Port Triggering Screen	120
8.3.1 Port Triggering Rule: Add/Edit	122
8.4 The Address Mapping Screen	123
8.4.1 Address Mapping Rule: Add/Edit	124
8.5 The Default Server Screen	125
8.5.1 Default Server: Edit	126
8.6 The ALG Screen	127
8.7 Technical Reference	128
8.7.1 NAT Definitions	128
8.7.2 What NAT Does	128
8.7.3 How NAT Works	129
8.7.4 NAT Application	129
Firewall	132
9.1 Overview	132
9.1.1 What You Can Do in this Chapter	132
9.1.2 What You Need to Know	133
9.2 The Firewall Overview Screen	134
9.3 The DoS Screen	134
9.4 The Firewall Rules Screen	135
9.4.1 Firewall Rule: Add/Edit	136
9.5 The Device Service Screen	138
9.5.1 Device Service: Edit	140
9.5.2 Trust Domain: Add/Edit	140
9.6 The Zone Control Screen	141
9.7 The Service Screen	142
9.7.1 Service: Add/Edit	143
9.8 The MAC Filter Screen	144
9.8.1 MAC Filter: Add/Edit	145
9.9 The Certificate Screen	146
9.10 The AAA Server	147
9.10.1 LDAP Server: Add/Edit	148
9.10.2 RADIUS Server: Add/Edit	150
Security Service	152
10.1 Overview	152
10.1.1 What You Can Do in This Chapter	152
10.1.2 What You Need to Know	152
10.2 The Content Filter Screen	153
10.2.1 Content Filter: Add/Edit	156
VPN	160
11.1 Overview	160
11.2 What You Can Do in this Chapter	160
11.3 What You Need to Know	160
11.4 The VPN Status Screen	163
11.5 The IPsec VPN Screen	164
11.5.1 VPN Gateway: Add/Edit	166
11.5.2 VPN Connection: Add/Edit	172
11.5.3 The Default_L2TP_VPN_GW IPsec VPN Rule	175
11.5.4 PPTP VPN Troubleshooting Tips	176
11.6 The PPTP VPN Screen	177
11.6.1 PPTP VPN Troubleshooting Tips	179
11.7 The L2TP VPN Screen	180
11.7.1 L2TP Setup - Server	180
11.7.2 L2TP Setup - Client	182
11.7.3 L2TP VPN Troubleshooting Tips	183
11.8 The L2TP Client Status Screen	186
11.9 The GRE VPN Screen	187
11.9.1 GRE VPN: Add/Edit	188
11.10 Technical Reference	189
11.10.1 IPsec Architecture	189
11.10.2 Encapsulation	190
11.10.3 IKE Phases	191
11.10.4 Negotiation Mode	192
11.10.5 IPsec and NAT	192
11.10.6 VPN, NAT, and NAT Traversal	193
11.10.7 ID Type and Content	194
11.10.8 Pre-Shared Key	195
11.10.9 Diffie-Hellman (DH) Key Groups	195
Bandwidth Management	196
12.1 Overview	196
12.1.1 What You Can Do in this Chapter	196
12.1.2 What You Need to Know	196
12.2 The General Screen	198
12.3 The Queue Setup Screen	199
12.3.1 QoS Queue: Add/Edit	201
12.4 The Classification Setup Screen	202
12.4.1 QoS Class: Add/Edit	203
12.5 The Policer Setup Screen	206
12.5.1 QoS Policer: Add/Edit	207
12.6 The Shaper Setup Screen	208
12.6.1 QoS Shaper: Add/Edit	209
12.7 Technical Reference	210
Network Management	214
13.1 Overview	214
13.1.1 What You Can Do in This Chapter	214
13.2 The SNMP Screen	214
System	217
14.1 Overview	217
14.1.1 What You Can Do in This Chapter	217
14.2 The Scheduler Rule Screen	217
14.2.1 Scheduler Rule: Add/Edit	218
Log / Report	219
15.1 Overview	219
15.1.1 What You Can Do in this Chapter	219
15.1.2 What You Need To Know	219
15.2 The Log Viewer Screen	220
15.3 Log Settings	221
15.3.1 Log on USB Settings: Edit	222
15.3.2 System and Email: Edit	224
15.3.3 Remote Server Log Settings: Edit	226
Service / License	229
16.1 Overview	229
16.2 The License Screen	229
Device Name	231
17.1 Overview	231
17.2 The Device Name Screen	231
Host Name List	233
18.1 Overview	233
18.2 The Host Name List Screen	233
18.2.1 Add Host Name	233
Date / Time	235
19.1 Overview	235
19.2 The Date / Time Screen	235
User Account	238
20.1 Overview	238
20.2 What You Can Do in this Chapter	238
20.3 The User Account Screen	238
20.3.1 Users Account: Add/Edit	239
USB Storage	241
21.1 Overview	241
21.1.1 What You Need To Know	241
21.1.2 Before You Begin	242
21.2 The USB Storage Screen	242
21.2.1 Add a USB Share	244
Diagnostic	245
22.1 Overview	245
22.1.1 What You Can Do in this Chapter	245
22.2 The Network Tools Screen	245
22.3 The Packet Capture Screen	246
Firmware Upgrade	249
23.1 Overview	249
23.2 The Firmware Screen	249
23.3 The Mobile Profile Screen	251
Backup / Restore	253
24.1 Overview	253
24.2 The Backup / Restore Screen	253
Language	255
25.1 Overview	255
25.2 The Language Screen	255
Restart / Shutdown	256
26.1 Overview	256
26.2 The Restart / Shutdown Screen	256
Troubleshooting	257
27.1 Power, Hardware Connections, and LEDs	257
27.2 VPN2S Access and Login	258
27.3 Internet Access	260
27.4 VPN2S Configuration	261
Customer Support	265
Legal Information	271

Match case Limit results 1 per page

Chapter 15 Log / Report

VPN2S User’s Guide

225

TLS Security

Select the check box if you want encrypted communications between the mail

server and the VPN2S.

Security

Select

SSL/TLS

to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS).

Select

STARTTLS

to upgrade a plain text connection to a secure connection using

SSL/TLS.

Mail Subject

Type the subject line for the outgoing e-mail.

Alert Mail Subject

Type the subject line for the outgoing alert e-mail.

Send From

Type the e-mail address from which the outgoing e-mail is delivered. This address is

used in replies.

Send Log to

Type the e-mail address to which the outgoing e-mail is delivered.

Send Alerts to

Type the e-mail address to which alerts are delivered.

Sending Log

Select how often log information is e-mailed. Choices are: When Full, Hourly and

When Full

Hourly and When Full

Daily and When Full

, and

Weekly and When Full

Day for Sending Log

This field is available if the log is e-mailed weekly. Select the day of the week the log

is emailed.

Time for Sending Log

This field is available if the log is e-mailed weekly, daily or hourly. Select the time of

day (hours and minutes) when the log is e-mailed. Use 24-hour notation.

SMTP Authentication

Select this check box if it is necessary to provide a user name and password to the

SMTP server.

Username

This box is effective when you select the

SMTP Authentication

check box. Type the

user name to provide to the SMTP server when the log is e-mailed.

Password

This box is effective when you select the

SMTP Authentication

check box. Type the

password to provide to the SMTP server when the log is e-mailed.

Retype to Confirm

Type the password again to make sure that you have entered is correctly.

Log Consolidation

Enable

Select this to activate log consolidation. Log consolidation aggregates multiple log

messages that arrive within the specified

Log Consolidation Interval

. In the

Log

Viewer

tab, the text “[count=x]”, where x is the number of original log messages, is

appended at the end of the

Message

field, when multiple log messages were

aggregated.

Log Consolidation Interval

(seconds)

Type how often, in seconds, to consolidate log information. If the same log message

appears multiple times, it is aggregated into one log message with the text

“[count=x]”, where x is the number of original log messages, appended at the end

of the

Message

field.

Log Settings

System Log

Use the System Log drop-down list to change the log settings for all of the log

categories.

disable all logs

(red X) - do not log any information for any category for the system

log or e-mail any logs to e-mail server 1 or 2.

enable normal logs

(green check mark) - create log messages and alerts for all

categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the

VPN2S will e-mail logs to them.

enable normal logs and debug logs

(yellow check mark) - create log messages,

alerts, and debugging information for all categories. The VPN2S does not e-mail

debugging information, even if this setting is selected.

Table 101

Configuration > Log / Report > Log Settings > Edit (System and Email)

LABEL

DESCRIPTION