ZyXEL VMG3925 User Guide - Page 32
General, ATM PVC Configuration, ADSL over ATM, Encapsulation, PPPoE, IPv4/IPv6 Mode, IPv4 Only,
View all ZyXEL VMG3925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 4 Tutorials Connection Mode Encapsulation IPv6/IPv4 Mode ATM PVC Configuration VPI/VCI Encapsulation Mode Service Category Account Information PPP User Name PPP Password PPPoE Service Name Static IP Address Others Routing PPPoE IPv4 36/48 LLC/SNAP-Bridging UBR without PCR [email protected] ABCDEF! MyDSL 192.168.1.32 Authentication Method: AUTO PPPoE Passthrough: Disabled NAT: Enabled IGMP Multicast Proxy: Enabled Apply as Default Gateway: Enabled VLAN: Disabled 3 Enter the General and ATM PVC Configuration settings as provided above. Set the Type to ADSL over ATM. Choose the Encapsulation specified by your DSL service provider. For this example, the service provider requires a username and password to establish Internet connection. Therefore, select PPPoE as the WAN encapsulation type. Set the IPv4/IPv6 Mode to IPv4 Only. 4 Enter the account information provided to you by your DSL service provider. 5 Configure this rule as your default Internet connection by selecting the Apply as Default Gateway check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as 192.168.5.2 (DNS server1)/192.168.5.1 (DNS server2). 6 Leave the rest of the fields to the default settings. 7 Click Apply to save your settings. VMG3925-B10A User's Guide 32