ZyXEL VMG3925 User Guide - Page 95
SSID1, WPA2-PSK, No Security
View all ZyXEL VMG3925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 Wireless WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS. See Section 7.10.9.3 on page 111 for more information about WPS. Note: The VMG applies the security settings of the SSID1 profile (see Section 7.2 on page 86). If you want to use the WPS feature, make sure you have set the security mode of SSID1 to WPA2-PSK or No Security. Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click Apply to activate the WPS function. Then you can configure the WPS settings in this screen. Figure 36 Network Setting > Wireless > WPS The following table describes the labels in this screen. Table 23 Network Setting > Wireless > WPS LABEL DESCRIPTION General WPS Select Enable to activate WPS on this VMG. Add a new device with WPS Method Method 1 Use this section to set up a WPS wireless network using Push Button Configuration (PBC). Select Enable and click Apply to activate WPS method 1 on the VMG. WPS Click this button to add another WPS-enabled wireless device (within wireless range of the VMG) to your wireless network. This button may either be a physical button on the outside of device, or a menu button similar to the WPS button on this screen. Method 2 Note: You must press the other wireless device's WPS button within two minutes of pressing this button. Use this section to set up a WPS wireless network by entering the PIN of the client into the VMG. Select Enable and click Apply to activate WPS method 2 on the VMG. VMG3925-B10A User's Guide 95