ZyXEL WAX620D-6E User Guide - Page 112
Wireless Bridge, VLAN Settings, Port Settings, Configuration, LABEL, DESCRIPTION, Note: For WAX620D-6E
View all ZyXEL WAX620D-6E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 9 Network Table 40 Configuration > Network > VLAN (continued) LABEL DESCRIPTION PVID This field displays the PVID of a port. You can click Edit to set the PVID in the Edit Port screen. VLAN Configuration Add Edit Remove Activate/ Inactivate # Status Name VID This only governs the incoming untagged packets. The Zyxel Device will tag packets received on the port with the specified PVID. The packets will then be sent to the VLANs they belong to accordingly. Click this to create a new entry. For features where the entry's position in the numbered list is important (features where the Zyxel Device applies the table's entries in order like the SSID for example), you can select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This is the index number of the VLAN ID. This field indicates whether the VLAN is enabled (a yellow bulb) or not (a gray bulb). This field displays the name of each VLAN. This field displays the VLAN ID. Member Note: The VLAN ID you set here will be added as an entry in the Wireless Bridge VLAN Settings table. This field displays the VLAN membership to which the port belongs. This also displays if outgoing packets from the port are tagged or not. (T) means the packets going out from the port are tagged. (U) means the packets going out from the port are untagged. Note: For WAX620D-6E, WAX640S-6E, and NWA220AX-6E, the Tx-tagging settings are unconfigurable. The Tx-tagging settings will be synced with the PVID settings in the Port Settings table. If the VID is the same as the PVID set on the port, the outgoing traffic will be untagged, the member port will display (U). Otherwise, the outgoing packets will be tagged with the VID, the member port will display (T). Wireless Bridge Vlan Setting This section appears if your Zyxel Device supports wireless bridge. See the feature comparison table in Section 1.2 on page 14. Add Click this to add an entry in the table. Remove # Select an entry and click this to remove the selected entry. This field is a sequential value. It is not associated with any VLAN ID. Wireless Bridge Vlan ID (1-4094) Enter a VLAN ID for the wireless bridge. Duplicate VLAN IDs are not allowed. The VLAN IDs you set on your root AP should be the same as the VLAN IDs you set here. See Section 1.3 on page 22 for more information on wireless bridge. Note: The VLAN ID you set here will be added as an entry in the VLAN Configuration table. NWA/WAC/WAX Series User's Guide 112