ZyXEL WAX620D-6E User Guide - Page 169

Chapter 13 AP Profile Table 66 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security Mode: wpa2-mix (continued) LABEL DESCRIPTION Enterprise Select this to enable 802.1X secure authentication with a RADIUS server. ReAuthentication Timer Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited time. Personal This field is available when you select the wpa2, wpa2-mix or wpa3 security mode. Select this option to use a Pre-Shared Key (PSK) with WPA2 encryption or Simultaneous Authentication of Equals (SAE) with WPA3 encryption. Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Advance Note: Click on the Show Advanced Settings button to show the fields describe below. Cipher Type Select an encryption cipher type from the list. Idle timeout Group Key Update Timer Radius Settings Primary / Secondary Radius Server Activate Radius Server IP Address Radius Server Port Radius Server Secret Primary / Secondary Accounting Server Activate Accounting Server IP Address Accounting Server Port Accounting Share Secret Accounting Interim Update • auto - This automatically chooses the best available cipher based on the cipher in use by the WiFi client that is attempting to make a connection. • aes - This is the Advanced Encryption Standard encryption method. It is a more recent development over TKIP and considerably more robust. Not all WiFi clients may support this. Enter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Enter the interval (in seconds) at which the AP updates the group WPA2 encryption key. Select this to have the Zyxel Device use the specified RADIUS server. Enter the IP address of the RADIUS server to be used for authentication. Enter the port number of the RADIUS server to be used for authentication. Enter the shared secret password of the RADIUS server to be used for authentication. Select the check box to enable user accounting through an external authentication server. Enter the IP address of the external accounting server in dotted decimal notation. Enter the port number of the external accounting server. The default port number is 1813. You need not change this value unless your network administrator instructs you to do so with additional information. Enter a password (up to 128 alphanumeric characters) as the key to be shared between the external accounting server and the Zyxel Device. The key must be the same on the external accounting server and your Zyxel Device. The key is not sent over the network. This field is available only when you enable user accounting through an external authentication server. Interim Update Interval General Server Settings NAS IP Address Select this to have the Zyxel Device send subscriber status updates to the accounting server at the interval you specify. Specify the time interval for how often the Zyxel Device is to send a subscriber status update to the accounting server. If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server) IP address attribute, enter it here. NWA/WAC/WAX Series User's Guide 169