ZyXEL WAX620D-6E User Guide - Page 50
NWA220AX-6E, WAX620D-6E, and WAX640S-6E LED continued, NWA220AX-6E and WAX620D-6E are connected
View all ZyXEL WAX620D-6E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 3 Hardware Table 14 NWA220AX-6E, WAX620D-6E, and WAX640S-6E LED (continued) COLOR STATUS DESCRIPTION Amber Green Blinks between amber and green alternately 3 times and then turns solid green for 3 seconds. The Zyxel Device is discovering an AC, or is managed by NCC but fails to connect with NCC, and is reconnecting with the NCC. Amber Green Blinks between amber and green alternately 2 times and then turns solid green for 3 seconds. The Zyxel Device is managed by an AC but the uplink is disconnected. Green Slow Blinking (On for 1 second, Off for 1 second) The wireless module of the Zyxel Device is disabled or fails, the Zyxel Device is using default WiFi settings, or the Zyxel Device is connected with NCC but is not yet registered with NCC. Green Steady On Amber Steady On Note: WiFi networks turn off automatically when NWA220AX-6E and WAX620D-6E are connected to a device that supplies power using IEEE 802.3af PoE. The Zyxel Device is booting up, or the Zyxel Device's wireless interface is activated, and WiFi clients are connected to the Zyxel Device. The Zyxel Device is ready for use in limited power mode (see Table 28 on page 76), the Zyxel Device's wireless interface is activated, and/or WiFi clients are connected to the Zyxel Device. Bright Blue Steady On White Slow Blinking (On for 100ms per second) Note: WiFi networks turn off automatically when NWA220AX-6E and WAX620D-6E are connected to a device that supplies power using IEEE 802.3af PoE. The Zyxel Device's wireless interface is activated, but there are no WiFi clients connected. Locator LED is on. It switches off automatically after the configured amount of time (1-60 min). Default duration is 10 minutes. Blue Red Slow Blinking (Blink for 1 time, Off for 1 second) On Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) Slow Blinking (Blink for 3 times, Off for 3 seconds) Note: The color of the white LED may have slight differences (for example, very light purple) on different models. The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. The Zyxel Device fails to boot up or is experiencing system failure. The Zyxel Device is undergoing firmware upgrade. The uplink connection of the Zyxel Device is disconnected. NWA/WAC/WAX Series User's Guide 50